The Impact of High-Efficiency Mechatronic Drive Systems on Energy Reduction

by Komoneed | Oct 2, 2024

In an era where energy conservation is paramount, high-efficiency mechatronic drive systems are emerging as vital components in various industries. These systems combine mechanical, electrical, and electronic engineering principles to enhance performance while minimizing energy consumption. As businesses seek to lower their operational costs and environmental impact, the adoption of these advanced technologies are becoming increasingly crucial.

The question then becomes, what is the best way to adopt these technologies in industrial applications? Francois Sieberhagen, National Product Engineer – Product Management at SEW-EURODRIVE, says that optimising the entire drive system leads to significant improvements. He says that the energy expenses associated with operating electric motors may account for more than 80% of the total cost of ownership (TCO).

Sieberhagen suggests focusing on optimising the efficiency of each component in the drive chain to ensure that they all have high energy efficiency ratings, both individually and as a system. He explains that two prevailing international standards govern the efficiency of electric motors.

IEC 60034-30-1 covers line-operated AC motors. The standard refers to efficiency classes from IE1 to IE4, with IE1 – Standard Efficiency being the least efficient and IE4 – Super Premium Efficiency the most efficient.

IEC TS 60034-30-2 specifies efficiency classes for inverter duty motors not covered by IEC 60034-30-1. This standard introduces an additional efficiency class, IE5 – Ultra Premium Efficiency, which is currently the highest defined class.

Exceeding the standard

In Australia, MEPS regulations mandate that low voltage motors meet a minimum energy performance standard of IE2, which is classified as high efficiency. Sieberhagen notes that the motors supplied by SEW-EURODRIVE to the Australian market not only meet but surpass this requirement, with efficiency classes ranging from premium (IE3) to ultra-premium (IE5).

MOVIGEAR® performance combines the motor, gear unit, and frequency inverter into a single, compact housing, with integrated communication for operation on all standard Ethernet-based infrastructures. This innovative drive unit is notable for its space-saving design, impressive overload capability and it is up to 50% lighter than conventional drive systems. By combining the inverter with IE5-class motors, MOVIGEAR® performance surpasses the highest defined energy efficiency class IES2 to IEC 61800-9-2 for systems comprising of a motor and inverter, setting a new benchmark that outperforms current market solutions. These products are often used for dynamic material handling applications. In Europe, one fulfilment centre achieved 1710 kg/year fewer CO2 emissions and a 57% average energy saving per drive after modernising with a MOVIGEAR® performance solution. They were also able to reduce noise by 50% due to the drives being fan-free.

The local experience is similar. “A number of Australian airports have achieved energy savings in their baggage-handling conveyor lines by installing MOVIGEAR® performance. The extent of the improvement ranges from 50% to 70%,” says Sieberhagen.

A versatile solution for any application

Other components in the drive system also play a role in reducing energy consumption. SEW-EURODRIVE’s DR2C series synchronous motors also meet the requirements of the IE5 efficiency class. These motors, designed for pure inverter operation, offer dynamic and thermal reserves for a sustainable operation and lifecycle cost reduction. Interior permanent magnet (IPM) technology reduces the size of the motors.

“A DR2C series motor can be two sizes smaller than its equivalent asynchronous motor,” says Sieberhagen.

Sieberhagen also points out that the operating temperature of the DR2C motor has a role to play in contributing to the sustainability of the system. Since the motor runs cooler, it lasts longer. The longer lifetime is once again suitable for both the environment and the bottom line.

Another component to be optimised in materials-handling applications is the drive unit. The SEW-EURODRIVE MOVIMOT® advanced drive unit combines an asynchronous motor with a frequency inverter to create a decentralised drive unit that can be combined with any standard gear unit. Depending on the choice of motor, the efficiency rating will be either IE5 or IE3. Nominal power ratings for drives with the ultra-premium efficiency DR2C series synchronous motor range from 0.75 kW to 2.4 kW; for the DRN series, the range is 0.37 kW to 7.5 kW.

“Further, motors operated with inverters can reduce the energy consumption by adjusting the motor speed to precisely match the application requirements,” says Sieberhagen.

Overall efficiency

Sieberhagen says that maximising energy efficiency relies not just on the individual components but also on the exact way they coordinate with each other. When these components are designed to be a perfect fit, the optimisation is complete. The interplay between cutting-edge electronics and closed-loop control technology on the one hand, and an optimised high-efficiency motor and efficient helical gear unit on the other, culminates in system savings of up to 50% compared to the standard alternative.

Adopting high-efficiency mechatronic drive systems is a transformative approach to energy management across various industries. These systems significantly reduce energy consumption, minimise waste, and enhance operational performance. Consequently, they not only lower operating costs but also contribute to a more sustainable future. As businesses continue to embrace these technologies, the potential for energy reduction and environmental stewardship will undoubtedly grow, paving the way for a greener industrial landscape.

The Innovation Hub Shaping the Future: 5 Centers of AI Excellence

by Komoneed | Oct 2, 2024

Back to basics: Coles trials boxes for fruit & veg

by Komoneed | Oct 2, 2024

In a move to reduce plastic waste and the use of single-use plastic bags in its fresh produce department, Coles has launched a new trial that will give customers the option to use a cardboard box when buying loose fruit and vegetables.

Customers will be given the opportunity to reuse one of the cardboard boxes used to deliver fresh fruit and vegetables to Coles stores — giving the box a second life and helping shoppers to reduce the need to use plastic bags in the fresh produce department.

The plastic-free alternative is free of charge and is available to collect loose fresh produce items in select stores. Customers can then use the boxes to carry items home where they can be recycled, or they can leave the box at the checkout for another customer.

The eight-week trial will take place in five stores, including Prahan and Waverly Gardens in Melbourne, Noosa Heads in Queensland, Ocean Shores in New South Wales and the Perth suburb of Hilton.

Coles Chief Operations and Sustainability Officer Matt Swindells said not only does the initiative help reduce the use of single-use plastic produce bags, the cardboard boxes provide a free solution for those who forget their reusable shopping bags.

“We know our customers want us to provide more sustainable packaging solutions, and this trial offers a plastic-free alternative to fresh produce bags that, if successful, could see a sizeable reduction in the number of plastic produce bags in circulation,” Swindells said.

“The great thing about these boxes is that they fit easily in your trolley, and can be taken home and recycled, or left at store for someone else to use again. It also brings a local grocer feel to your shop while helping to create a more sustainable future,” he said.

In addition to the box trial, in 2023 Coles stopped selling soft plastic shopping bags in-store and online, which removed 230 million plastic bags from circulation in one year. 100% recycled paper bags that can be recycled kerbside are now available for purchase, as well as a range of reusable tote, chiller and mesh produce bags.

Image caption: Coles team member Jessica with Coles Prahran team member Dimple.

Make your voice heard on the U.S. Forest Service’s National Old Growth Amendment

by Komoneed | Oct 2, 2024

The U.S. Forest Service is seeking public comment through September 20 on its proposed National Old Growth Amendment that will affect how millions of acres of national forests will be managed. Conserving older forests is critical. But we’re concerned the