Search

Phillip Keefe’s Leggy Furniture Joins Traditional Woodworking and Crawling Insects

08 Oct, 2024

This post was originally published on Colossal

Phillip Keefe’s furniture appears like it might scuttle away in the night. The Chicago-based designer uses traditional techniques like hand-carving and wood joinery to sculpt lively pieces evocative of spiders, crabs, and other creepy, crawly critters.

The Tim Burton-esque furnishings were initially inspired by Keefe’s dog Iggy, who frequently accompanied him to the studio. “His ambitions always exceeded his ability, and what I’m sure began with helpful intentions ended as scatterings of wood shavings all over my shop,” the designer added, noting that Iggy’s most important contribution was serving as a model. Keefe hand-carved iterations of the dog’s legs, which became the basis for a series of chairs and tables named after the pup.

a wood chair with insect-like legs and arms
“Iggy No. 5”

The Arthropod collection emerged similarly. As Keefe explored various wood joints, he discovered one method that would allow furniture legs to attach to the side of a piece rather than rest underneath. The resulting bookshelf, a cabinet, and a desk with square skeletal frames and legs that seem primed for movement, as if they might scurry across the room to greet you at any moment.

If you’re in Chicago, catch Keefe’s anthropomorphic works in a pop-up project through October 11. Otherwise, find more on his website and Instagram.

a detail of a wood chair with insect-like legs and arms
Detail of “Iggy No. 5”
a wood cabinet with insect-like legs
“Arthropod No. 3”
a detail of a wood bookshelf with insect-like legs
Detail of “Arthropod No. 4”
a wood table with insect-like legs
Detail of “Arthropod No. 2”
a detail of a wood table with insect-like legs
Detail of “Arthropod No. 2”
a detail of a wood table with insect-like legs
Detail of “Arthropod No. 2”
a wood chair with insect-like legs and arms
“Iggy No. 4”
a wood table with insect-like legs
“Iggy No. 6”
a wood table rests upside down with one leg unattached
A work in progress
the designer joins a leg to a piece of furniture
Keefe in the studio

Do stories and artists like this matter to you? Become a Colossal Member today and support independent arts publishing for as little as $7 per month. The article Phillip Keefe’s Leggy Furniture Joins Traditional Woodworking and Crawling Insects appeared first on Colossal.

Pass over the stars to rate this post. Your opinion is always welcome.
[Total: 0 Average: 0]

You may also like…

Gap Between Water Supply and Demand to Widen as Climate Warms: Study

Gap Between Water Supply and Demand to Widen as Climate Warms: Study

Stronger water management efforts will be essential to overcoming the gap between supply and demand as the planet continues to warm, according to a new analysis by Lorenzo Rosa, principal investigator at Carnegie Science, and Matteo Sangiorgio, a researcher at the Polytechnic University of Milan. For the study, the pair of researchers quantified issues of […]
The post Gap Between Water Supply and Demand to Widen as Climate Warms: Study appeared first on EcoWatch.

Coffee Grounds and Mushroom Spores Can Be 3D Printed Into a Compostable Plastic Alternative, Researchers Say

Coffee Grounds and Mushroom Spores Can Be 3D Printed Into a Compostable Plastic Alternative, Researchers Say

In a new study, researchers have made a promising discovery: a compostable material that can serve as an alternative to plastic. The material is made from a combination of used coffee grounds and spores from Reishi mushrooms that are made into a paste, then 3D printed. The idea started when Danli Luo, corresponding author of […]
The post Coffee Grounds and Mushroom Spores Can Be 3D Printed Into a Compostable Plastic Alternative, Researchers Say appeared first on EcoWatch.

Australasian Waste Recycling Expo debuts as ReGen at ICC

Australasian Waste Recycling Expo debuts as ReGen at ICC

Australia’s circular resource exhibitors, buyers and thought leaders are set to attend ReGen | Australia’s Circular Resource Expo, taking place on 23–24 July 2025 at ICC Sydney.

The two-day trade event, organised by Diversified Australia, marks the evolution of what was previously known as the Australasian Waste Recycling Expo, a longstanding brand dedicated to resource management and waste reduction for over 15 years.

The rebrand to ReGen reflects the expo’s expanded scope and emphasis on the circular economy, welcoming an array of innovative exhibitors, experts and emerging professionals committed to reducing waste, promoting resource efficiency and fostering sustainable markets.

“At Diversified Australia, we’re proud to produce events that drive positive industry change,” said Ali Lawes, event director for ReGen at Diversified.

“ReGen embodies our commitment to equip and empower industry leaders and practitioners in support of Australia’s ambitious 2035 targets for waste elimination, resource circulation, and pollution reduction.”

ReGen will showcase technical displays, offer vital industry insights and feature keynote addresses, panel discussions and networking opportunities.

The program aims to help attendees — from seasoned experts to newcomers — navigate their roles in creating a circular economy that keeps resources in use, minimises waste and regenerates natural systems.

As part of its evolution, ReGen will incorporate Circularity, Australia’s original circular economy conference, into its 2025 education program.

Since its launch in 2022, Circularity has served as a platform for industry practitioners to discuss Australia’s transition to a circular economy.

Now integrated into ReGen, Circularity will reach a broader audience, offering free sessions on topics such as circular product design and sustainable waste management — ensuring these critical insights remain accessible to all attendees.

For the last three years Circularity has been proudly presented by Planet Ark’s Australian Circular Economy Hub in partnership with Diversified Australia.

Planet Ark CEO Rebecca Gilling said that integrating the country’s leading circular economy event into ReGen would offer even more impactful opportunities to drive Australia’s circular transition.

“The inclusion of Circularity into ReGen is a significant step forward in promoting circular economy principles on a national scale in collaboration with the waste and recycling industry,” Gilling said.

“At Planet Ark, we are thrilled to see Circularity evolve into a broader platform, ensuring critical conversations about sustainable resource management and circular product design reach more professionals and innovators than ever before. This partnership underscores the importance of collaboration in building a circular Australia.”

The expo’s name, ReGen, represents both the regenerative practices it champions and the generational transformation required to meet sustainability goals.

ReGen invites participants to “Rethink, Redesign, Repurpose, and Renew” as they contribute to a circular and sustainable future for Australia.

For more information and to register, visit regenexpo.com.au

Image credit: iStock.com/izusek

0 Comments