Search

Orangutan Observed Treating a Wound With a Medicinal Plant for the First Time

We are an online community created around a smart and easy to access information hub which is focused on providing proven global and local insights about sustainability

06 May, 2024

This post was originally published on Eco Watch

Biologists have observed a Sumatran male orangutan using the sap and chewed leaves of a medicinal plant to treat an open wound on his face.

While there has been previous evidence of self-medication behaviors in animals, it is the first known incident of an animal in the wild treating a wound with a “biologically active substance,” a press release from the Max Planck Institute of Animal Behavior said.

“During daily observations of the orangutans, we noticed that a male named Rakus had sustained a facial wound, most likely during a fight with a neighboring male,” said biologist Isabelle Laumer, the study’s lead author, in the press release.

The orangutan ate and applied sap numerous times from a climbing plant that had pain-relieving and anti-inflammatory properties. He also used the plant mesh to cover the entire gash on his face.

“Thus, medical wound treatment may have arisen in a common ancestor shared by humans and orangutans,” the press release said. “While sick and avoidance behavior can be regularly observed in non-human animals, self-medication in the form of ingestion of specific plant parts is widespread in animals but exhibited at low frequencies. The closest relatives to humans, the great apes, are known to ingest specific plants to treat parasite infection and to rub plant material on their skin to treat sore muscles.”

The study was conducted in Indonesia’s Suaq Balimbing protected rainforest, home to roughly 150 Sumatran orangutans, a critically endangered species.

Rakus carefully tore leaves from the Akar Kuning (Fibraurea tinctoria) or liana plant three days following his injury. He chewed the leaves and applied their juice repeatedly to the wound for several minutes, then covered the cut with the munched up leaves.

“This and related liana species that can be found in tropical forests of Southeast Asia are known for their analgesic and antipyretic effects and are used in traditional medicine to treat various diseases, such as malaria. Analyses of plant chemical compounds show the presence of furanoditerpenoids and protoberberine alkaloids, which are known to have antibacterial, anti-inflammatory, anti-fungal, antioxidant, and other biological activities of relevance to wound healing,” Laumer said in the press release.

The wound did not show signs of being infected after the injury and had closed after five days.

“Interestingly, Rakus also rested more than usual when being wounded. Sleep positively affects wound healing as growth hormone release, protein synthesis and cell division are increased during sleep,” Laumer added.

Rakus is believed to have been roughly 32 years old when he applied the wound treatment, reported NPR.

“The behavior of Rakus appeared to be intentional as he selectively treated his facial wound on his right flange, and no other body parts, with the plant juice. The behavior was also repeated several times, not only with the plant juice but also later with more solid plant material until the wound was fully covered. The entire process took a considerable amount of time,” Laumer said in the press release.

Senior author of the study Caroline Schuppli, an orangutan researcher, evolutionary biologist and conservationist, said it was possible that Suaq orangutans using the medicinal plant to treat their wounds came about “through individual innovation.”

“Orangutans at the site rarely eat the plant. However, individuals may accidentally touch their wounds while feeding on this plant and thus unintentionally apply the plant’s juice to their wounds. As Fibraurea tinctoria has potent analgesic effects, individuals may feel an immediate pain release, causing them to repeat the behavior several times,” Schuppli said.

Left: Pictures of Fibraurea tinctoria leaves. Right: Rakus feeding on Fibraurea tinctoria leaves (photo taken on the day after applying the plant mesh to the wound). Saidi Agam / Suaq Project

Because the wound treatment behavior had not been seen before, using Fibraurea tinctoria for this purpose may not have been previously used by Suaq orangutans. As with all the area’s adult males, Rakus’ birthplace is unknown, but he was not born there.

“Orangutan males disperse from their natal area during or after puberty over long distances to either establish a new home range in another area or are moving between other’s home ranges,” Schuppli explained in the press release. “Therefore, it is possible that the behavior is shown by more individuals in his natal population outside the Suaq research area.”

The active application of a biologically active substance for wound management by a great ape species brings new insight into self-medication in humans’ closest relatives, as well as wound medication’s evolutionary origins in general.

“The treatment of human wounds was most likely first mentioned in a medical manuscript that dates back to 2200 BC, which included cleaning, plastering, and bandaging of wounds with certain wound care substances,” Schuppli said. “As forms of active wound treatment are not just human, but can also be found in both African and Asian great apes, it is possible that there exists a common underlying mechanism for the recognition and application of substances with medical or functional properties to wounds and that our last common ancestor already showed similar forms of ointment behavior.”

Considered one of the World’s Top 25 Most Endangered Primate Species, there are only approximately 14,000 individual Sumatran orangutans left, according to the Sumatran Orangutan Conservation Programme.

The biggest threat to these highly intelligent, beautiful creatures is habitat loss due to the conversion of forests for the growing and harvesting of palm oil and other agricultural development.

The post Orangutan Observed Treating a Wound With a Medicinal Plant for the First Time appeared first on EcoWatch.

Pass over the stars to rate this post. Your opinion is always welcome.
[Total: 0 Average: 0]

You may also like…

Energy Efficiency as an Imperative Climate Strategy

Energy Efficiency as an Imperative Climate Strategy

With mandatory climate statement disclosure rolling out in Australia, businesses need to start reporting on their emissions and sustainability plans for the future. As companies begin assessing the relevant risks and opportunities related to various climate scenarios, energy efficiency presents itself as an immediate climate-strategy with long-term benefits.

Commencing 1 January 2025, businesses that meet two of the three conditions — more than 500 employees, gross assets above $1 billion or $500 million or more in consolidated gross revenue — are required to lodge a climate statement, which discloses their climate-related plans, financial risks and obligations. As part of the gradual roll-out, by 1 July 2027, businesses that meet two of these conditions — more than 100 employees, gross assets above $25 million or exceeding $50 million in consolidated gross revenue — will also be required to report.

This climate statement will need to include the company’s sustainability governance, climate risks and opportunities, including those physical and transition related. They will also need to disclose their Scope 1 and 2 emissions, strategy to decarbonise, and conduct scenario analysis on the short, medium and long term impacts on the business. By the second year of reporting, businesses will also be expected to report on Scope 3 emissions.

Scenario analysis will be based on various assumptions of the state of the climate, one of which includes a possible future where global temperature has increased 2.5°C or more. They will be required to share their climate strategy and steps they are taking long-term in preparation for this scenario.

Common themes within climate strategies will include switching to renewable energy sources, electrifying fleet vehicles, purchasing carbon credits, and carbon capture and storage. Many of these methods look at reducing emissions through the energy source, or targeting the carbon aspect directly; however, climate strategies can also include reducing the amount of energy used. By investing in more energy efficient equipment, sites can maintain production whilst using less energy and producing less emissions.

When increasing energy efficiency and reducing energy consumption first, businesses will see short-term impacts; however, in the long term, they are also improving their foundation for an energy transition. Assuming no other changes, higher energy efficiency can lead to decreased energy demand, allowing for reduced system requirements when specifying and planning for self-generation or energy costs.

To understand what opportunities are available for upgrading to more energy efficient equipment, businesses can start with an energy audit to understand how energy is being consumed across site. Energy audits, like the ABB Energy Appraisal, can provide a roadmap for where and how equipment can be upgraded for the best energy saving potential. An energy audit identifies areas that can be immediately improved with existing equipment on the market, so there is no need to wait for the commercialization or development of more sustainable technology. Going beyond just changing all lights to LEDs, efficiency recommendations may include areas where variable speed drives can be added to control motor speed or upgrading from an IE3 motor to an IE5 ultra-premium efficiency or IE6 hyper-premium efficiency motor to reduce energy losses by 40% or more. This area can often be overlooked on sites as the Minimum Energy Performance Standard (MEPS) in Australia for motors is just IE2.

Mostly used in pumps, compressors, conveyors and fans, motors may seem like a minor part of a site; however, with 45% of the world’s electricity converted into motion by industrial electric motors, there are many opportunities for energy savings. In fact, a recent survey commissioned by ABB IEC Low voltage motors, showed that 92% of surveyed businesses in Australia recognize the important role of electric motors in achieving sustainability targets. In this same survey, participants ranked a reduction in operating cost as a more important driver for investing in energy efficiency than lowering their organization’s emissions. This is because upgrading to newer, more efficient equipment provides benefits beyond just emission reduction. For example, ABB’s Synchronous Reluctance (SynRM) Motors, available in IE5 ultra-premium efficiency or IE6 hyper-premium efficiency, use no rare earth metals or magnets. Running quieter and with bearing temperatures reduced by up to 15°C and winding temperatures by up to 30°, SynRM motors have longer maintenance periods, superior reliability, and contribute to a better operational environment.

Looking ahead, upgrading to an IE5 SynRM motor also provides more visibility into Scope 3 emissions, as SynRM motors meet ABB’s circularity criteria and transparency on environmental impact is provided through Environmental Product Declarations (EPDs).

By requiring companies to disclose their climate information, these new legal requirements are opening the door and facilitating more internal discussions on environmental impact and emission reduction. Whilst mandatory climate reporting is only required of large business entities this year, the progressive roll-out and Scope 3 emission reporting requirements mean that businesses of all sizes in Australia will be impacted by these new requirements. As businesses become more conscious of how sustainability should be integrated into their operations and finances, there is no better time to start investing in energy efficient solutions.

For more information, click here.

Image credit: iStock.com/denizunlusu

0 Comments