Search

Africa’s ‘Mining Boom’ Threatens More Than a Third of Its Great Apes

We are an online community created around a smart and easy to access information hub which is focused on providing proven global and local insights about sustainability

06 Apr, 2024

This post was originally published on Eco Watch

More than a third of Africa’s great apes are being put at much greater risk from global mining activities than scientists had previously believed, according to a new study led by the German Centre for Integrative Biodiversity Research (iDiv).

The green energy transition’s increasing demand for critical minerals like copper, nickel, cobalt and lithium has led to a mining surge in Africa, a press release from iDiv said. This causes more deforestation in tropical rainforests — the habitat of great apes and many other species.

Chimpanzee habitat cleared for a railway to transport iron ore to a port in Guinea. Genevieve Campbell / iDiv

“Africa is experiencing an unprecedented mining boom threatening wildlife populations and whole ecosystems. Mining activities are growing in intensity and scale, and with increasing exploration and production in previously unexploited areas,” the study said. “Africa contains around 30% of the world’s mineral resources, yet less than 5% of the global mineral exploitation has occurred in Africa, highlighting the enormous potential for growth in this sector. Substantial production increases in the renewable energy sector are expected to cause a boom in mineral exploitation.”

As much as a third of the great ape population in Africa — almost 180,000 gorillas, chimpanzees and bonobos — could be threatened by mining, the study said.

The researchers pointed out that mining’s real impact on great apes and biodiversity in general could be even higher, since there is no requirement that mining companies make biodiversity data available to the public, the press release said.

For the study, the research team used data on mining sites in 17 countries in Africa. The team defined 6.21-mile buffer zones to measure direct impacts like noise and light pollution and habitat destruction. They also defined 31.07-mile buffer zones to look at indirect impacts associated with increased human activity, such as roads and infrastructure built to access previously remote areas. This new development puts increased pressure on great apes from habitat loss, hunting and a greater risk of disease transmission.

The team used the African great ape density distribution data to investigate how many apes could be negatively impacted and made maps of areas where high ape densities overlapped with frequent mining.

“Currently, studies on other species suggest that mining harms apes through pollution, habitat loss, increased hunting pressure, and disease, but this is an incomplete picture,” said Dr. Jessica Junker, lead author of the study, researcher for Re:wild and a postdoctoral researcher at Martin Luther University Halle-Wittenberg’s Institute of Biology and iDiv, in the press release. “The lack of data sharing by mining projects hampers our scientific understanding of its true impact on great apes and their habitat.” 

The largest overlaps of mining sites and areas with high ape density in both buffer zones were in the West African countries of Sierra Leone, Mali, Guinea and Liberia. The biggest overlap of chimpanzee density and mining was in Guinea, where as much as 83 percent of the ape population — more than 23,000 chimpanzees — could be impacted by mining activities either directly or indirectly.

Overall, areas with relatively high mining and ape densities were not protected.

The study, “Threat of mining to African great apes,” was published in the journal Science Advances.

The research team also looked at the intersection of mining areas with “Critical Habitat,” which consist of regions that are essential because of their unique biodiversity apart from apes. The team discovered a 20 percent overlap between these. Designation of critical habitat necessitates strict environmental regulations, particularly for those mining projects that are seeking funding from the International Finance Corporation — part of the World Bank — and other entities that adhere to similar standards and are looking to operate inside these zones. Earlier efforts to map Africa’s critical habitat have failed to include major areas of ape habitat that could qualify under global benchmarks.

Direct and indirect impacts of mining on great apes in Africa. Gabriele Rada / iDiv

“Companies operating in these areas should have adequate mitigation and compensation schemes in place to minimize their impact, which seems unlikely, given that most companies lack robust species baseline data that are required to inform these actions,” said Dr. Tenekwetche Sop, who manages Senckenberg Museum of Natural History’s IUCN SSC A.P.E.S. database — a repository of population data on all great apes — in the press release. “Encouraging these companies to share their invaluable ape survey data with our database serves as a pivotal step towards transparency in their operations. Only through such collaborative efforts can we comprehensively gauge the true extent of mining activities’ effects on great apes and their habitats.”

Although these impacts are hard to quantify, they frequently extend far beyond a mining project’s boundaries, and mining companies rarely consider or take steps to mitigate the risks. Furthermore, offset or compensation is based on approximate impacts, which researchers say are often underestimated and inaccurate. And while offset programs generally last only the length of the mining project, most impacts from mining on great apes are not temporary.

“Mining companies need to focus on avoiding their impacts on great apes as much as possible and use offsetting as a last resort as there is currently no example of a great ape offset that has been successful,” explained Dr. Genevieve Campbell, senior researcher at Re:wild and head of the IUCN SSC PSG SGA/SSA ARRC Task Force, in the press release. “Avoidance needs to take place already during the exploration phase, but unfortunately, this phase is poorly regulated and ‘baseline data’ are collected by companies after many years of exploration and habitat destruction have taken place. These data then do not accurately reflect the original state of the great ape populations in the area before mining impacts.’’

Junker emphasized that the best way to protect great apes and biodiversity is to let them be.

“A shift away from fossil fuels is good for the climate but must be done in a way that does not jeopardize biodiversity. In its current iteration it may even be going against the very environmental goals we’re aiming for,” Junker said. “Companies, lenders and nations need to recognize that it may sometimes be of greater value to leave some regions untouched to mitigate climate change and help prevent future epidemics.”

The post Africa’s ‘Mining Boom’ Threatens More Than a Third of Its Great Apes appeared first on EcoWatch.

Pass over the stars to rate this post. Your opinion is always welcome.
[Total: 0 Average: 0]

You may also like…

15 Charts Reveal Fashion’s Considerable Environmental Performance Gap—and How to Close It

15 Charts Reveal Fashion’s Considerable Environmental Performance Gap—and How to Close It

Data analysis by Good On You’s analysts   The Fashion Planet Benchmark Report reveals the alarming gap between industry action and environmental reality, with major brands scoring just 30% in the planet pillar of Good On You’s brand ratings. These charts highlight critical shortfalls in emissions tracking, supply chain transparency, and circular design—and clearly show […]
The post 15 Charts Reveal Fashion’s Considerable Environmental Performance Gap—and How to Close It appeared first on Good On You.

Reaching net zero in the manufacturing sector

Reaching net zero in the manufacturing sector

In order for Australia to reach its goal of net zero by 2050, it needs the help of its manufacturing sector, which accounts for 10% of the nation’s carbon emissions. And the sector is pulling its weight, the Western Sydney Manufacturers Forum heard recently — developing ‘green concrete’, carbon-tracking sensors and technology which can minimise carbon emissions during beer fermentation.

More than 30 experts from universities, industry and government described multiple ways sustainability can deliver real-world impact, cost savings and market differentiation for manufacturers. The forum heard many examples, including an opportunity to reduce emissions from concrete production — which contributes around 8% of global carbon emissions, or more than aviation and shipping combined.

Professor Olivia Mirza from Western Sydney University described the initial pushback to the use of ‘green concrete’ — an eco-friendly alternative which is produced using waste materials — in the Parramatta Light Rail project.

“The initial cost for building [the light rail using green concrete] was let’s say 10 or 12% higher, but then if you do the cost-benefit analysis — less maintenance — it ended up saving 25%,” Mirza said.

The forum highlighted the importance of clear communication and education, suggesting the use of modern formats like social media platform TikTok to effectively engage different stakeholders, especially in the trades, around decarbonisation in building materials.

The aim of the event — hosted by the NSW Smart Sensing Network and the NSW Decarbonisation Innovation Hub at Penrith Panthers — was to showcase opportunities and help manufacturers and their supply chain navigate new emissions reporting requirements.

Dr Martin Ams, a product engineer at Macquarie University, said innovative optical fibre sensors are helping utilities like Sydney Water contribute to net zero by predicting concrete corrosion in wastewater infrastructure.

“Over time, concrete can actually capture and remove CO2 directly from the atmosphere through a process known as carbonation,” he said. “If you have concrete structures that are absorbing CO2 from your atmosphere, you want them to last long so you can keep absorbing this CO2.”

Dr Victor Hernandez Moreno from the UTS Centre for Advanced Manufacturing described how advanced automation and ‘digital twin’ technology can drive more sustainable production decisions for manufacturers. His team operates two mirrored beer-brewing facilities — in Sydney and Germany — that share a unified digital twin, allowing them to analyse data, enhance product quality and reduce carbon emissions.

Keynote speaker and Climate Change Authority Chair Matt Kean said advanced manufacturing in Western Sydney is poised to lead Australia’s decarbonisation efforts by electrifying industrial processes, improving energy efficiency and producing green materials like hydrogen.

“The [Authority’s] Sector Pathways Review revealed that Australia has a great shot at crafting the products, goods and services that will be in high demand,” Kean said. “As the world shifts to net zero, we must be prepared to back our entrepreneurs and innovators and remove policy and regulatory barriers that inhibit progress.”

Kean said products like renewable hydrogen, green ammonia and green metals were essential to reimagining Australian industry. “Importantly, they’re going to be in hot demand, not just domestically, but right across the globe.”

NSW Net Zero Commission principal advisor Manuel Weirich said there is lots of opportunity to reduce emissions in light industry such as manufacturers and smaller processors, which emit 45% of NSW industry emissions.

“These emissions come from things like burning gas in boilers, from engines and motors, chemical processes, calcination in bricks or in cement, and lots of other things,” Weirich said. “Some of the processes are difficult to decarbonise, but others already have solutions available … including heat pumps for water heating, electric forklifts, and better energy efficiency.  

“Manufacturing has a big role to play, to produce the clean materials, the low-emissions materials, and the products and machinery that other sectors use to decarbonise themselves.”

NSW Chief Scientist Hugh Durrant-Whyte said with investment in R&D, skills, digitisation and real-time data, and by preparing for mandatory reporting, Australia can build resilient supply chains and drive sustainable, high-value growth across all business sectors. 

“Digitisation will help identify gaps, improve performance and address skill shortages — especially in hard-to-abate industries,” Durrant-Whyte said. “Achieving net zero will benefit everyone. Small businesses can cut energy costs and preserve expertise through digitisation. Medium businesses can scale up and strengthen supply chains. Large corporations will streamline compliance, meet stakeholder expectations and drive sustainable growth.”

The Executive Director of the Advanced Manufacturing Readiness Facility (AMRF), Ben Kitcher, described how his organisation helps manufacturers adopt technologies that help them become profitable and sustainable.

“What we’re discovering is there is this mutual objective around decarbonisation which always leads back to productivity and profitability,” Kitcher said.

The forum heard that while digital literacy is strong among younger generations, manufacturing still suffers from outdated perceptions. It heard how SMEs in Western Sydney can stay competitive by embracing digital transformation, sustainability and circular economy principles. SMEs are also facing ongoing challenges in resourcing innovation and workforce development, but programs like CSIRO’s Generation STEM are stepping in with practical support through paid internships and university and industry talent matching.

“We have a lot of SMEs that come to us and say their challenge is recruitment and retention, but sometimes we’ve got some SMEs that come to us and say they don’t have the time to do this piece of work,” Generation STEM team leader Luana Caro said.

Chovil & Thake sustainability marketing specialist Hannah Welch said 45% of Australians always or often consider sustainability as part of their purchasing decision-making. She said manufacturers can leverage environmental, social and governance (ESG) data not just for compliance, but as a strategic marketing tool to attract investors and recruit staff.

Andrew Bedrossian, Manager of Renewable Manufacturing at the NSW Department of Climate Change, Energy, the Environment and Water (DCCEEW), said the Net Zero Manufacturing Initiative supports clean technology innovation and low-carbon product manufacturing, with particular focus on revitalising local solar manufacturing. He said there is growing industry appetite and significant investment interest, especially from Western Sydney manufacturers, pointing to strong potential for scale-up and impact.

“We have the world-leading IP here with some of the best brains in the business when it comes to solar,” Bedrosian said. “All the commercial windfalls are offshore. We don’t have anything here, and that’s a real shame. How can we change that?”

Image caption: Climate Change Authority Chair Matt Kean delivered the keynote speech at the Western Sydney Manufacturers Forum. Image credit: AM Visuals.

0 Comments